2018 China International Textile Machinery Exhibition and ITMA Asia exhibition successfully concluded.
* from : * author : admin * time : 2018-04-25 * click : 19
In June 19, 2017, the 2018 China International Textile Machinery Exhibition and ITMA Asia Expo online registration were officially launched. In the next 8 months, many textile enterprises have expressed their expectations of the exhibition, showing an unprecedented enthusiasm for registration, and refurbishing the highest record of the previous exhibition area. It is estimated that by the curtain of October, the exhibition area will exceed 170 thousand square meters.
With the successful conclusion of the joint exhibition in February 28, 2018, the sixth joint exhibition entered the final stage of the exhibition and the new stage of audience recruitment. Although the deadline for registration has been over, queuing companies are still in an endless stream. Before May 21st, all registered enterprises will receive the notice of allocation.
The sixth joint exhibition will be held at the National Convention and Exhibition Center (Shanghai) from 15 to 19 October 2018. Up to now, there are more than 1600 textile machinery enterprises in 27 countries and regions, including China, Germany, Italy, Japan and Switzerland, with more than 500 Chinese big land exhibitors and more than 500 overseas exhibitors. .
In addition to the three single storehouses of H1 to H3 in the 6 pavilions of the National Convention and Exhibition Center (Shanghai) and one of the three double decker pavilions of H4.1 to H6.1, the exhibition will be opened in the North landing hall.
Distribution of exhibition area
The H1 and H2 pavilions are textile machinery, chemical fiber machinery and nonwoven machinery exhibition area.
The H3 Pavilion is a weaving machine exhibition area.
H4.1 is a knitting machine exhibition area.
H5.1 is the exhibition area of textile equipment, clothing machinery and printing machinery.
H6.1 is a printing and dyeing machine exhibition area.
In addition, the North landing hall will show knitting, weaving, weaving machinery and newly opened functional area - research and innovation area. Judging from the product category, spinning machinery accounts for the largest proportion, followed by printing and dyeing and finishing, knitting machinery and weaving machinery.At present, China's textile machinery industry is gradually gaining recognition of the global market through quality and innovation. In order to encourage innovation, this exhibition will set up a new research and innovation area. At the same time, the exhibition also further refines the exhibits code.
The first appearance of the Research Innovation Zone
2018 an important change of China International Textile Machinery Exhibition and ITMA Asia exhibition is to set up "research and innovation area".
The "13th Five-Year" period is the decisive stage for building a well-off society in an all-round way, and also the final sprint stage for the textile industry to build a strong textile country. In view of the problems that are not adapted to the development requirements of the equipment manufacturing industry in many aspects, such as investment in R & D funds, talent incentive mechanism, intellectual property protection and the cooperation mechanism of production, learning and research, and so on, the organizers of the exhibition are actively taking measures to encourage the cooperation of the parties of production, research and research to promote the cross boundary. Communication and innovation integration.
The Textile Machinery Association of China and the textile industry branch of the China International Trade Promotion Commission, as an industry organization, have the responsibility and mission in the exhibition of their own brands to promote innovation and promote the combination of production, learning and research.
After careful research, the sponsor decided to open the "Research Innovation Zone" at the 2018 China International Textile Machinery Exhibition and ITMA Asia Exhibition and provide research and Innovation Zone subsidies to promote innovative achievements out of the campus and research institutions, and truly integrate into the industry and enterprises. The required research and Innovation Zone exhibitor can apply for the 2018 Exhibition Research Innovation Zone subsidy, with a maximum discount of 50%, and the subsidy is provided by the Chinese sponsor and the European textile machinery manufacturer Committee (CEMATEX).
Further refinement of the exhibit code
Compared with previous exhibitions, 2018 China International Textile Machinery Exhibition and ITMA Asia exhibition still have some new changes. One is to improve the code of the exhibits.
In recent years, the printing industry has developed rapidly, and there has been a trend of combining digital printing with traditional printing. In order to meet the needs of the development of the spinning machine, the organizers of the exhibition decided to improve the code of the exhibits and listed the printing equipment from the printing and dyeing equipment, including printing machinery, digital printing machine, printing auxiliary machinery and so on.
In addition, the clothing machinery exhibition code is perfected, and the clothing machinery is subdivided into the software and system of product planning, design and related automation technology, product development equipment, pre shrinkage, adhesive, cutting preparation, cutting machinery and related automation technology, sewing, sewing, quilting and quilting machinery.
Through a series of readjustment and refinement, the organizers hope to create a more convenient, considerate and efficient exhibition environment for all participants; on the other hand, more exhibitors and cross-border enterprise industries are expected to participate in, strengthen communication and communication with each other, bring more solutions to the industry, and upgrade the industry. Industry technology progress makes greater contribution. (tigst planning department)
With the successful conclusion of the joint exhibition in February 28, 2018, the sixth joint exhibition entered the final stage of the exhibition and the new stage of audience recruitment. Although the deadline for registration has been over, queuing companies are still in an endless stream. Before May 21st, all registered enterprises will receive the notice of allocation.
The sixth joint exhibition will be held at the National Convention and Exhibition Center (Shanghai) from 15 to 19 October 2018. Up to now, there are more than 1600 textile machinery enterprises in 27 countries and regions, including China, Germany, Italy, Japan and Switzerland, with more than 500 Chinese big land exhibitors and more than 500 overseas exhibitors. .
In addition to the three single storehouses of H1 to H3 in the 6 pavilions of the National Convention and Exhibition Center (Shanghai) and one of the three double decker pavilions of H4.1 to H6.1, the exhibition will be opened in the North landing hall.
Distribution of exhibition area
The H1 and H2 pavilions are textile machinery, chemical fiber machinery and nonwoven machinery exhibition area.
The H3 Pavilion is a weaving machine exhibition area.
H4.1 is a knitting machine exhibition area.
H5.1 is the exhibition area of textile equipment, clothing machinery and printing machinery.
H6.1 is a printing and dyeing machine exhibition area.
In addition, the North landing hall will show knitting, weaving, weaving machinery and newly opened functional area - research and innovation area. Judging from the product category, spinning machinery accounts for the largest proportion, followed by printing and dyeing and finishing, knitting machinery and weaving machinery.At present, China's textile machinery industry is gradually gaining recognition of the global market through quality and innovation. In order to encourage innovation, this exhibition will set up a new research and innovation area. At the same time, the exhibition also further refines the exhibits code.
The first appearance of the Research Innovation Zone
2018 an important change of China International Textile Machinery Exhibition and ITMA Asia exhibition is to set up "research and innovation area".
The "13th Five-Year" period is the decisive stage for building a well-off society in an all-round way, and also the final sprint stage for the textile industry to build a strong textile country. In view of the problems that are not adapted to the development requirements of the equipment manufacturing industry in many aspects, such as investment in R & D funds, talent incentive mechanism, intellectual property protection and the cooperation mechanism of production, learning and research, and so on, the organizers of the exhibition are actively taking measures to encourage the cooperation of the parties of production, research and research to promote the cross boundary. Communication and innovation integration.
The Textile Machinery Association of China and the textile industry branch of the China International Trade Promotion Commission, as an industry organization, have the responsibility and mission in the exhibition of their own brands to promote innovation and promote the combination of production, learning and research.
After careful research, the sponsor decided to open the "Research Innovation Zone" at the 2018 China International Textile Machinery Exhibition and ITMA Asia Exhibition and provide research and Innovation Zone subsidies to promote innovative achievements out of the campus and research institutions, and truly integrate into the industry and enterprises. The required research and Innovation Zone exhibitor can apply for the 2018 Exhibition Research Innovation Zone subsidy, with a maximum discount of 50%, and the subsidy is provided by the Chinese sponsor and the European textile machinery manufacturer Committee (CEMATEX).
Further refinement of the exhibit code
Compared with previous exhibitions, 2018 China International Textile Machinery Exhibition and ITMA Asia exhibition still have some new changes. One is to improve the code of the exhibits.
In recent years, the printing industry has developed rapidly, and there has been a trend of combining digital printing with traditional printing. In order to meet the needs of the development of the spinning machine, the organizers of the exhibition decided to improve the code of the exhibits and listed the printing equipment from the printing and dyeing equipment, including printing machinery, digital printing machine, printing auxiliary machinery and so on.
In addition, the clothing machinery exhibition code is perfected, and the clothing machinery is subdivided into the software and system of product planning, design and related automation technology, product development equipment, pre shrinkage, adhesive, cutting preparation, cutting machinery and related automation technology, sewing, sewing, quilting and quilting machinery.
Through a series of readjustment and refinement, the organizers hope to create a more convenient, considerate and efficient exhibition environment for all participants; on the other hand, more exhibitors and cross-border enterprise industries are expected to participate in, strengthen communication and communication with each other, bring more solutions to the industry, and upgrade the industry. Industry technology progress makes greater contribution. (tigst planning department)
Next: Spin
关闭返回